Samsung NX60T8711SS/AA User Manual - Page 18
Ignition, Cookware, WARNING, Requirements, Material characteristics, CAUTION, Manual ignition
![]() |
View all Samsung NX60T8711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Cooktop Cooktop Ignition CAUTION The knob LED indicates if a burner knob has been turned on. It does not indicate if the burner flame is on. Check for an actual flame, whether the knob LED is on or off. Make sure all surface burners are properly installed. To light a burner: 1. Push in the control knob, and then turn 2 it to the Lite position. The knob LED is on and you will hear a "clicking" sound indicating the electronic ignition system 1 is working properly. 2. After the surface burner lights, turn the control knob to shift it out of the Lite position and turn off the electronic ignition system. 3. Turn the control knob to adjust the flame level. Manual ignition If there is a power failure, you can ignite the burner manually. Use caution when doing this. 1. Hold a long gas grill lighter to the surface burner you want to light. 2. Push in the control knob for that burner, and then turn it to the Lite position. Turn on the grill lighter to ignite the burner. 3. After the burner is lit, turn the control knob to adjust the flame level. Flame level The flames on the burners should always stay under the cookware, and should not extend beyond the cookware bottom at any time. WARNING • Flames larger than the cookware bottom may result in a fire or physical injury. • When you set a burner to simmer, do not turn the burner knob quickly. Watch the flame to make sure it stays on. • After turning on a surface burner, make sure that the burner has ignited even if the knob LED is on. Adjust the level of the flame by turning the burner knob. • Always turn off the surface burner controls before removing cookware. All surface burner controls should be turned OFF when you are not cooking. • Always turn the burners off before you go to sleep or go out. • If you smell gas, turn off the gas to the range and call a qualified service technician. NEVER use an open flame to locate a leak. • If the LED on the control knob doesn't turn on when the surface burner has ignited, call a qualified service technician. • If the knob LED illuminates, but the surface burner does not ignite, turn off the control knob immediately. Cookware Requirements • Flat bottom and straight sides. • Tight-fitting lid. • Well-balanced with the handle weighing less than the main portion of the pot or pan. Material characteristics • Aluminum: An excellent heat conductor. Some types of food may cause the aluminum to darken. However, anodized aluminum cookware resists staining and pitting. • Copper: An excellent heat conductor but discolors easily. • Stainless steel: A slow heat conductor with uneven cooking performance but is durable, easy to clean, and resists staining. • Cast-Iron: A poor conductor but retains heat very well. • Enamelware: Heating characteristics depend on the base material. 18 English NX60T8711SS_AA_DG68-01220A-00_EN.indd 18 3/26/2020 9:00:49 PM
![](/manual_guide/products/samsung-nx60t8711ssaa-user-manual-8f820d8/18.png)