Samsung NX60T8711SS/AA User Manual - Page 40
Return the burner heads to their, positions on top of the manifold valves.
View all Samsung NX60T8711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Maintenance Burner grates and components Turn off all surface burners and make sure they have all cooled down. 1. Remove the center burner grate(C) following both sides grates.(L/R) L C R 2. Remove the burner caps from the burner heads. 1 3. Remove the burner heads from the 2 valve manifolds to reveal the starter 3 electrodes. 4. Clean all removable grates and burner components in warm, soapy water. Do not use steel-wool pads or abrasive cleaners. 5. Rinse and dry grates and burner components thoroughly. 6. Return the burner heads to their positions on top of the manifold valves. Make sure a starter electrode is inserted through the hole in each burner head. 8 7 NOTE 6 See the next page for detailed burner component re-assembly instructions. 7. Return the burner caps to their positions on top of the burner heads. To ensure proper and safe operation, make sure the burner caps lie flat on top of the burner heads. 8. Reinstall the burner grates in their respective positions. 9. Turn on each burner and check if it operates properly. After verifying that a burner operates normally, turn it off. Brass burner head NOTE • The brass parts of your burner will change color with use. However, this will not affect performance and you can clean the brass parts with a brass cleaner. • After cleaning, confirm that the burner port openings aren't plugged. • Do not wash any burner components in a dish washer. CAUTION • The starter electrodes are not removable. Do not attempt to remove them by force. • To avoid chipping, do not bang grates and caps against each other or against hard surfaces, such as cast iron cookware. • The burner spreader can be blocked by food or dust. Clean the spreader if it appears blocked. If you clean the spreader with water, assemble it only after it is completely dry. If the spreader is wet, it might prevent the burners from igniting. • To avoid falling down the grates, make sure to remove both sides grates first. Maintenance 40 English NX60T8711SS_AA_DG68-01220A-00_EN.indd 40 3/26/2020 9:01:01 PM