Samsung NX60T8711SS/AA User Manual - Page 51
English 51, Problem, Cause, Action, Ground Fault Interrupter
View all Samsung NX60T8711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Problem Cause The oven racks are This is normal. difficult to slide. Fan noise. This is normal. The convection fan This is normal. is not working. Action Apply a small amount of vegetable oil to a paper towel, and then wipe the edges of the oven racks with the paper towel. Racks become dull and hard to slide if they are left in the oven during a self-clean cycle. The convection fan runs until the function is over or the door is opened. The fan starts automatically when the oven reaches the preheat temperature. Others Problem The product is not level. The display goes blank. Cause Action The appliance has been installed improperly. The leveling leg(s) is (are) damaged or uneven. Make sure the floor is level, strong, and stable. If the floor sags or slopes, contact a carpenter. Check and level the range. (See the Installation Instructions.) The kitchen cabinets are not properly aligned and make the range appear to be not level. Ensure that cabinets are square and provide sufficient room for installation. The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. Replace fuse or reset circuit breaker. Troubleshooting NX60T8711SS_AA_DG68-01220A-00_EN.indd 51 English 51 3/26/2020 9:01:06 PM