Samsung NX60T8711SS/AA User Manual - Page 45
Removing and reinstalling the oven door, Locked position, Fig. 1, about 5°
View all Samsung NX60T8711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing and reinstalling the oven door How to remove the door CAUTION • The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. • Turn the power OFF before removing the door. 1. Open the door completely. 2. Pull the hinge locks down toward the door frame to the unlocked position. Hinge lock How to reinstall the door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentations of the hinge arms into the bottom edges of the hinge slots. The notches in each hinge arm must be fully inserted into the bottoms of each slot. Bottom edge of slot Hinge arm Indentation Maintenance Locked position Unlocked position Fig. 1 about 5° Fig. 2 3. Firmly grasp both sides of the door at the top. 4. Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1). 5. Lift the door up and out until the hinge arms are clear of the slots (Fig. 2). 3. Open the door fully. If the door will not open fully, the indentations are not inserted correctly in the bottom edges of each slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock Locked position Unlocked position 5. Close the oven door. English 45 NX60T8711SS_AA_DG68-01220A-00_EN.indd 45 3/26/2020 9:01:05 PM