Samsung RF31FMESBSR User Manual Ver.0.4 (English, French, Spanish) - Page 12

Re-attaching The, Refrigerator Doors, Disassembling The Flex - assembly

Get Samsung RF31FMESBSR PDF manuals and user guides View all Samsung RF31FMESBSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

RE-ATTACHING THE REFRIGERATOR DOORS To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 3. Press the locking tab and separate the Wire Connector. 1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser. 2. Insert the clip in the install pack and check that it holds the line firmly. Type A Type B When reassembling it, be sure to connect CAUTION the wire harness. If it is not connected, the Flex Room does not work. Dispenser Center of Transparent coupler clip A (1/4") (6.35 mm) The Guide Lines clip A (1/4") (6.35 mm) 4. Remove 1 hex head bolt from each side with a socket wrench (10mm). DISASSEMBLING THE FLEX DOOR 1. Take out the Flex Zone ( 1 ) by lifting it up. 5. Lift up the Flex door from the rails. 1 2. Take off the cover ( 2 ) w/harness with a flatblade screwdriver (-). 2 Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost build-up. 12_ setting up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
12_
setting up
RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1.
The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
2.
Insert the clip in the install pack and check that
it holds the line firmly.
DISASSEMBLING THE FLEX
DOOR
1.
Take out the Flex Zone ( 
1
 ) by lifting it up.
2.
Take off the cover ( 
2
 ) w/harness with a flat-
blade screwdriver (-).
3.
Press the locking tab and separate the Wire
Connector.
When reassembling it, be sure to connect
the wire harness.
If it is not connected, the Flex Room does
not work.
4.
Remove 1 hex head bolt from each side with a
socket wrench (10mm).
5.
Lift up the Flex door from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from
closing completely and can cause frost
build-up.
CAUTION
CAUTION
2
1
Center of Transparent coupler
Center of Transparent coupler
The Guide Lines
The Guide Lines
Dispenser
Dispenser
clip A (1/4”)
clip A (1/4”)
(6.35 mm)
(6.35 mm)
clip A (1/4”)
clip A (1/4”)
(6.35 mm)
(6.35 mm)
Type A
Type A
Type B
Type B