Samsung RF31FMESBSR User Manual Ver.0.4 (English, French, Spanish) - Page 17
Installing a CO, Cylinder, For Sparkling Water Refrigerators Only - Optional - sodastream
View all Samsung RF31FMESBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
01 SETTING UP Installing a CO2 Cylinder (For Sparkling Water Refrigerators Only - Optional) To use the Sparkling Water feature on your refrigerator, you need to install a Sodastream CO2 cylinder. Purchasing CO2 Cylinders (60L) • Purchase cylinders (60L) at the nearest Sodastream retailer or on line at www.sodastream.com. • USE ONLY SODASTREAM carbonators (or CO2 cylinders (60L)). SAMSUNG and SODASTREAM are not legally responsible for any damage, including, but not limited to, property damage caused by gas leakage from the use of generic carbonators (or CO2 cylinders (60L)). The sparkling water system in your SAMSUNG refrigerator is designed to work ONLY WITH SODASTREAM carbonators (or CO2 cylinders (60L)) • We suggest buying extra cylinders for later use. Store extra cylinders in a cool, open space, well out of the reach of children. Do not store cylinders in the refrigerator. Water Line Hookup • Make sure that you have connected the refrigerator to a water line before installing the cylinder. Installing a Cylinder into the Refrigerator To install a cylinder in the refrigerator, follow these steps: 1. Open the Cylinder Cover. • The refrigerator comes from the factory with the Sparkling Water function set to Off. If the Sparkling Water function is Off, the OFF icon is displayed on the Display Panel. : Refer to Page 34 ; Turning Off the Sparkling Water Function. 2. Attach the Cylinder to the Regulator, and then rotate it clockwise. 3. Push the Cylinder into the Support. 4. Lock the Cylinder into place by pressing the Lever. • The inner pressure of the Cylinder may make it difficult to press the lever down. Hold the lever as shown in the illustration on the right, and then push down. • If you don't lock the cylinder into place, the refrigerator won't produce sparkling water. • If the cylinder is not tightly connected to the Regulator, it will leak CO2 gas, producing a hiss. If this occurs, repeat Steps 2, 3, and 4, making sure that the cylinder is firmly attached and locked into place. setting up _17