Samsung RF31FMESBSR User Manual Ver.0.4 (English, French, Spanish) - Page 14
Making Minor, Adjustments To The, Doors, Installing The Water, Dispenser Line - reviews
View all Samsung RF31FMESBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
How to adjust the level 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into the notch on the left control lever, and turn it counterclockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) MAKING MINOR ADJUSTMENTS TO THE DOORS Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. flat-blade screwdriver (-) Control Lever Fixed part Adjustment part Both control levers must be touching the CAUTION floor to avoid possible personal injury or property damage because of tipping. If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. The left door is fixed. To make minor door adjustments, adjust only the right door. 1. Pull out the flex door ( 1 ) to reveal the lower hinge ( 2 ). 2. Insert the supplied allen wrench (5/32") ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counter clockwise ( UP ). When you turn the hex wrench counter- clockwise ( ), the door will move up. 2 3 3 4 1 14_ setting up INSTALLING THE WATER DISPENSER LINE A water dispenser with a filter is one of the helpful features on your new refrigerator. To help promote better health, the water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. The water line also connects to the ice maker. For the ice maker to operate properly, water pressure of 20-125 psi (138 ~ 862Kpa) is required.