Samsung RF31FMESBSR User Manual Ver.0.4 (English, French, Spanish) - Page 20

( 4 ) Lighting (Hold 3 sec for ºC ↔ ºF) Lighting button serves two purposes: - To turn the dispenser light on and off - To switch the temperature units between ºC and ºF 1) Light Function Touching the Lighting button turns on the Dispenser LED lamp in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when someone uses the dispenser, press the Lighting button to turn the continuous mode off. 2) To switch the temperature units between ºC and ºF Touch and hold this button for 3 seconds to select the temperature display you want. Each time you press and hold the button, the ºC and ºF temperature modes alternate and the ºC and ºF icon lights up, indicating your selection. ( 5 ) Fridge (Hold 3 sec for Power Cool) The Fridge button serves two purposes: - To set the Fridge to your desired temperature. - To turn the Power Cool function on and off. 1) To set the Fridge temperature, press the Fridge button to set the refrigerator to the temperature you want. You can set the temperature between 44°F (7°C) and 34°F (1°C) . 2) Power Cool function Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open). ( 6 ) Ice Off (Hold 3 sec for Child Lock) The Ice Off button serves two purposes: - To turn the Ice maker on and off - To turn the Child Lock function on and off. 1) Ice Off Function If you don't want to make more ice, press the Ice Off button. 2) Child Lock Function Touch and hold this button for 3 seconds to lock the display, the Flex Zone panel, and the dispenser buttons so the buttons can not be used. When Child Lock is on, the refrigerator does not dispense ice, water, or sparkling water, even if the Dispenser Lever is pressed. The Child Lock icon lights up to indicate you've activated the Child Lock function. Press 3 seconds to unlock. 20_ operating ( 7 ) Sparkling Water ( Hold 3 sec for Cylinder Reset ) The Sparkling button serves three purposes : - To dispense sparkling (carbonated) water. - To select the carbonation level of the sparkling water. - To turn the Cylinder Reset Function on. 1) To dispense sparkling (carbonated) water. To dispense sparkling water, press the Sparkling Water button. When you press the Sparkling Water button while either Cubed Ice or Crushed Ice is selected, the Sparkling Icon will turn on. When there is no sparkling water left or the refrigerator is making sparkling water, the dispenser does not dispense sparkling water. 2) To select the carbonation level of the sparkling water. When you press the Sparkling Water button while the Sparkling Water Icon is turned on, the Carbonation Level will change as follows; Medium (Level-2) → Strong (Level-3) → Weak (Level-1) → Medium (Level-2). The next time the refrigerator makes sparkling water, it applies the new Carbonation Level. - If there is previously produced sparkling water inside the Sparkling Water tank, the refrigerator dispenses sparkling water with the previous carbonation level. (Changes in the carbonation level do not take effect until the next time the refrigerator makes sparkling water.) - While the refrigerator is producing sparkling water, the Carbonation Level icons light up in rotation (Level-1 → Level-2 → Level-3 → Level-1, etc.). If you press the Sparkling Water button when the refrigerator is making sparkling water, the current carbonation level is displayed for several seconds, and then the Carbonation Level icon light rotation begins again. If you press the Sparkling Water button again while the current carbonation level is being displayed, the carbonation level changes. The change in the carbonation level will take effect the next time the refrigerator makes sparkling water.