Samsung SCD351 Flash Guide (flash Manual) (English) - Page 80

ENGLISH IEEE 1394 Data Transfer System Requirements I CPU: faster Intel® Pentium III™ 450MHz compatible. I Operating system: Windows® 98SE, ME, XP, Mac OS (9.1~10.2) I Main memory: more than 64 MB RAM I IEEE1394 add-on card or built in IEEE1394 card Recording with a DV Connection Cable 1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only) 3. Connect the DV cable (not supplied) from the DV jack of the Camcorder to the DV jack of the other DV device. I Make sure that is displayed on the LCD screen. 4. Press the Start/Stop button to begin REC PAUSE mode. I PAUSE is displayed on the LCD screen. 5. Start playback on the other DV device while you monitor the picture. 6. Press the Start/Stop button to start recording. I If you want to pause recording momentarily, press the Start/Stop button again. 7. To stop recording, press the (STOP) button. IEEE 1394 I CPU:Intel® Pentium IIITM 450Mhz . I :Windows®98SE, ME, XP, Mac OS(9.1~10.2) I : 64MB RAM I IEEE 1394 DV 1. DV PLAYER DV ( ) USB USB AV MIC 2. Mode TAPE( ) AV ( SC-D353/D354/D355) MIC 3. DV ( ) DV / DV DV / I 4. Start/Stop( / ) REC PAUSE( ) I PAUSE( ) 5. , DV 6. Start/Stop( / ) I , Start/Stop( / ) 7. , (STOP( )) [ Notes ] I When using this Camcorder as a recorder, the pictures that appear I , , on a monitor may seem uneven, however recorded pictures will not be affected. I Operation is not guaranteed for all the recommended computer environments mentioned above. I While transmitting data from the Camcorder to PC at strong I I video audio (PC), electric field and strong magnetic field, VIDEO signal or AUDIO signal may transmit with noise. 80