Samsung SCX-4720F User Manual (user Manual) (ver.3.00) (English) - Page 282
Setting Up a Network-Connected Machine, Configuring Network Parameters on the Control Panel
View all Samsung SCX-4720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
9 In the Enter a port name field, enter the shared name. 10 Click OK and click Close. 11 For Windows NT 4.0, click OK. For Windows 2000/XP, click Apply and click OK. D Setting Up a Network-Connected Machine You have to set up the network protocols on the machine to use it as your network printer. Setting protocols can be accomplished by using the supplied network program. Please refer to the SyncThru User's Guide. You can configure the basic network parameters through the machine's control panel. Use the machine's control panel to do the following: • Print a Network Configuration Page • Enable or disable network protocols (IPX/SPX) • Configure TCP/IP • Configure IPX frame types Configuring Network Parameters on the Control Panel Supported Operating Systems NOTE: The operating systems supported by the network card may be different from the operating systems supported by the machine. The following table shows the network environments supported by the machine. Item Network Interface Requirements 10/100 Base-TX or 802.11b Wireless LAN USING YOUR MACHINE ON A NETWORK D.5