Samsung SCX-4720F User Manual (user Manual) (ver.3.00) (English) - Page 287
Configuring IPX Frame Types, Enable 802.3, Ethernet II, Enable SNAP, Enter, Stop/Clear
View all Samsung SCX-4720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
Configuring IPX Frame Types On IPX/SPX protocol networks (for example, Novell NetWare), the format of the network communication frames must be specified for the machine. In most cases, you can keep the "Auto" default setting. However, you can manually set the frame type format, if required. • Off: The IPX/SPX protocol is disabled. • Auto (default): Automatically senses and limits the frame type to the first one detected. • Enable 802.3: Limits the frame type to IPX over IEEE 802.3 frames. All others will be discarded. • Ethernet II: Limits the frame type to IPX over Ethernet Frames. All others will be discarded. • Enable 802.2: Limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All others will be discarded. • Enable SNAP: Limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others will be discarded. Take the following steps to change the frame type format: 1 Press Menu until you see "Network Setup" on the top line of the display. 2 Press the scroll button ( or ) until "Config Network" displays on the bottom line. 3 Press Enter to access the menu. 4 Press the scroll button ( or ) until "NetWare" displays on the bottom line. Press Enter. The first available menu item, "Off," displays on the bottom line. 5 Press the scroll button ( or ) until you see the desired frame type and press Enter. 6 Press the Stop/Clear to return to Standby mode. D.10 USING YOUR MACHINE ON A NETWORK