Samsung SCX-4720F User Manual (user Manual) (ver.3.00) (English) - Page 286
Enter, Upper Level, Stop/Clear, Dynamic Addressing BOOTP/DHCP
![]() |
View all Samsung SCX-4720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
7 Press the scroll button ( or ) to enter a number between 0 and 255 and press Enter or Upper Level to move between bytes. For the SCX-4720F/4720FS, you can enter a number using the number keypad and use the scroll button ( or ) to move between bytes. 8 Repeat step 7 to complete the address from the 1st byte to the 4th byte. 9 Press Enter. 10 To select other parameters, such as a Subnet Mask or a D Gateway, press the scroll button ( or ) until the desired item displays on the bottom line. Press Enter. 11 Repeat steps 7 through 9 to configure the other TCP/IP parameters. 12 Press Stop/Clear to return to Standby mode. Dynamic Addressing (BOOTP/DHCP) To have the TCP/IP address assigned automatically by the server, take the following steps: 1 Press Menu until you see "Network Setup" on the top line of the display. 2 Press the scroll button ( or ) until "Config Network" appears on the bottom line. 3 Press Enter. The first available menu item, "TCP/IP," appears on the bottom line. 4 Press the scroll button ( or ) to display "DHCP" on the bottom line and press Enter. 5 To assign the address from the BOOTP server, press Enter when "BOOTP" displays on the bottom line. USING YOUR MACHINE ON A NETWORK D.9
![](/manual_guide/products/samsung-scx4720f-user-manual-user-manual-ver300-english-c064830/286.png)