Samsung SPH-M540 User Manual (user Manual) (ver.f8) (English) - Page 117
Resetting Digit Dial Adaptation, I. Voice Services
View all Samsung SPH-M540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Voice Services To adapt Digit Dial to your voice: 1. Select and press > Tools > Voice Service. 2. Press Settings (right softkey) > Adaptation > Adapt Voice. 3. Press Start (left softkey) to begin the process. (The phone displays the first digit sequence.) 4. Wait for the beep, and then repeat the words, commands, and digits using a normal tone of voice. Ⅲ If the recording is acceptable (no mistakes and no background noises), say "Yes" or press the left softkey. Ⅲ If you need to rerecord the digits to fix any problems, say "No" or press the right softkey. (The phone then prompts you to say the digits again.) Wait for the beep, and then record the digits again. (Repeat this step until you are satisfied with the recording.) 5. After confirming that the recording is acceptable, repeat the recording process with the next set of digits. 6. Repeat steps 4 and 5 for an additional nine sets of digits. 7. When you are finished with a full session, you will reach a screen that reads, "Adaptation Complete." Note It is recommended that you perform the complete adaptation of Digit Dial at least once to achieve the maximum benefit of this feature. If a partial adaptation is performed, you can always return later and resume the process from the halfway point. Resetting Digit Dial Adaptation 1. Select and press > Tools > Voice Service. 2. Press Settings (right softkey) > Adaptation > Reset Voice. Note Reset Voice is available only after the phone has undergone an adaptation session. 3. Press Yes (left softkey). Section 2I. Voice Services 101