Samsung U28E590D User Manual - Page 75
DisplayPort Ver.
View all Samsung U28E590D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
6 Setup and Reset 6.5 DisplayPort Ver. Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. If the monitor (when set to HDMI 1, HDMI 2 or DisplayPort) is in power saving mode or is displaying the message Check Signal Cable, press the [ ] button to display the On Screen Display (OSD). You can select 1.1 or 1.2. If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the limitations in HBR1 transmission speeds. 6.5.1 Configuring DisplayPort Ver. 1 When the Function Key Guide appears, select [ ] by moving the JOG button UP. Next, press the JOG button. 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to DisplayPort Ver. controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear. System FreeSync Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. 1.1 Source Detection 1.2 Key Repeat Time Select your Displayport. Off Displayport 1.1 supports HBR 1, Off while 1.2 supports HBR 2. Auto Return 1.1 / 1.2 4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button. 5 The selected option will be applied. 75 6 Setup and Reset