Sanyo PLC-HF10000L Owner's Manual - Page 32
Input Selection, Direct Operation
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Side Control Side Control Input Selection Direct Operation INPUT button The input source changes each time you press the INPUT button on the side control as follows: Input 1→Input 2→ ... Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed. Remote Control Operation Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source. INPUT 1 button Input 1 INPUT 2 button Input 2 Remote Control RGB (PC analog) RGB RGB (Scart) RGB(PC digital) Y,Pb/Cb,Pr/Cr Video INPUT 1/2/3/4 buttons RGB(AV HDCP) S-video HDMI ✔Note: •" Input 3" and/or "Input 4" are selectable only when interface board(s) are connected to either or both of the slots. 32