Sanyo PLC-HF10000L Owner's Manual - Page 45
Standard, Corner correction, Corner pattern, Store, Keystone, Ceiling, Screen aspect, Reset
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Computer Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ed buttons to choose the item you want to adjust. Standard Adjusts the Horizontal/Vertical keystone distortion of the projected image. Corner correction Adjusts the corner distortion of the projected image. Corner pattern Choose a Corner pattern mode among Red, White, Blue, and Off. Store Store Keeps the keystone correction even when the AC power cord is unplugged. Reset.......... Releases the keystone correction when the AC power cord is unplugged. Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point ed7 8 buttons to correct the Standard or Corner distortion. (p.31) Ceiling Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Rear Screen aspect This function is used to scale the input source to fit the screen. Select one of the following aspect ratio which is suitable for your cable and computer. Select "Full" if you do not want to set aspect ratio. Full........Flexible aspect ratio 16:9.......16:9 aspect ratio 16:10.....16:10 aspect ratio 4:3........4:3 aspect ratio ✔Note • When the 16:9 function is selected, Wide(16:9) is not available in the PC and AV screen (pp.43, 51). Reset This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes. 45