Sanyo PLC-HF10000L Owner's Manual - Page 89
On-screen, Display, Resolution, H-freq.
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Appendix When an input signal is digital from the HDMI or DVI-D terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480i D-575i D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-WXGA 12 D-SXGA 1 D-SXGA 2 D-SXGA+ 1 D-SXGA+ 2 D-SXGA+ 3 D-SXGA+ 4 D-SXGA+ 5 D-SXGA+ 6 D-SXGA+ 7 D-UXGA RESOLUTION 640x480 720x480 i 720x576 i 720x480 720x575 800x600 1024x768 1366x768 1360x768 1376x768 1360x768 1366x768 1280x768 1280x768 1280x768 1280x800 1280x800 1280x800 1280x800 1280x1024 1280x1024 1400x1050 1400x1050 1400x1050 1400x1050 1400x1050 1400x1050 1400x1050 1600x1200 H-Freq. (kHz) 31.470 15.734 15.625 31.470 31.250 37.879 43.363 48.360 47.700 48.360 56.160 46.500 47.776 60.289 68.633 49.600 41.200 49.702 63.980 63.980 60.276 63.970 65.350 65.120 64.030 62.500 64.744 65.317 75.000 V-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) 59.940 D-WUXGA 2 1920x1200 74.038 60.000 h D-WSXGA+ 1 1680x1050 65.290 50.000 h D-WXGA+ 1 1440x900 55.935 60.000 D-720p 1280x720 45.000 50.000 D-720p 1280x720 37.500 60.320 D-1035i 1920x1035 i 33.750 60.000 60.000 D-1080i 1920x1080 i 1920x1080 i 33.750 28.125 60.000 D-1080psf/30 1920x1080 33.750 60.000 D-1080psf/25 1920x1080 28.125 72.000 D-1080psf/24 1920x1080 27.000 50.000 1920x1080 33.750 59.870 1920x1080 28.125 74.893 D-1080p 1920x1080 27.000 84.837 1920x1080 67.500 60.050 1920x1080 56.250 50.000 59.810 60.020 60.020 58.069 60.190 60.120 59.900 60.010 58.600 59.948 59.978 60.000 h D-480i and D-575i signals are acceptable only when transferred via an HDMI cable. V-Freq. (Hz) 59.950 59.954 59.887 60.000 50.000 60.000 60.000 50.000 60.000 50.000 48.000 30.000 25.000 24.000 60.000 50.000 ✔Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. • Specifications are subject to change without notice. • You might be able to project images even when signals other than above are inputted, however the functions of the projector could be limited. • Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the screen. If an image is not projected correctly, restart your PC. • D o not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. 89