Sennheiser EK 300 IEM G2 Instructions for Use - Page 54
Using the components
View all Sennheiser EK 300 IEM G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the components Switching the components on/off Switching the transmitter on/off ̈ Press the ON button ᕦ to switch the transmitter on. ̈ To switch the transmitter off, press the ON button until "OFF" appears on the display. Note: The transmitter can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button ᕦ serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display. Switching the receiver on/off Ƹ ̈ To switch the receiver on, turn the volume control Ƹ clockwise until it clicks. The red LED ᕣ lights up. ̈ To switch the receiver off, turn the volume control Ƹ counterclockwise until it clicks. The red LED ᕣ goes off. » Note: y The receiver has a short switch-on delay. y Remove the batteries or the accupack when the receiver will not be used for extended periods of time. ³· Ƹ Adjusting the volume You can adjust the volume at the headphone output on both the transmitter and the receiver. ̈ Use the volume control ᕢ or Ƹ to adjust the volume of the connected headphones. Volume up? - NO! When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes. 52