Sennheiser EK 300 IEM G2 Instructions for Use - Page 64
Adjustment tips for the operating menu - ew 300 iem g2 receiver
View all Sennheiser EK 300 IEM G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
BANK Bank CHAN Channel TUNE Tune SCAN Adjustment tips for the operating menu Switching between channel banks Via the "Bank" menu, you can switch between the nine channel banks of the ew 300 IEM G2 transmitter and receiver. The channel banks "1" to "8" have up to 12 switchable channels that are factory-preset to a transmission/ receiving frequency (see "The channel bank system" on page 42). The channel bank "U" (user bank) also has up to 12 switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range. When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number, the receiver display panel automatically displays the next free channel (see below). Switching between the channels in a channel bank Via the "Channel" menu, you can switch between the channels in a channel bank. Always set the transmitter and the receiver of a transmission link to the same channel. After scanning a channel bank (see "Scanning the channel banks for free channels (receiver only)" on page 62), only the free channels are displayed. Set the transmitter to one of the free channels Selecting the frequencies to be stored in the channel bank "U" Via the "Tune" menu, you can select the frequencies to be stored in the channel bank "U" (user bank). When you have selected one of the channel banks "1" to "8" and then select the "Tune" menu, the transmitter or receiver automatically switches to channel 01 of the channel bank "U". In this case, "U.01" briefly appears on the display. ̈ Use the ̆/̄ buttons to select the desired transmission or receiving frequency. Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For intermodulationfree frequencies, please refer to the enclosed frequency table. Scanning the channel banks for free channels (receiver only) Before putting one or several transmission links into operation, you should scan the selected channel bank for free channels. 62