Sennheiser HDE 2020-D-II Instruction manual Tourguide 2020-D - Page 29
Connecting external audio sources, Attaching the bodypack transmitter to clothing, Tourguide 2020-D
![]() |
View all Sennheiser HDE 2020-D-II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Putting the components into operation Connecting external audio sources You can connect an external audio source such as a CD player, MP3 player, tape player, etc. to the bodypack transmitter. (Please note that you cannot connect a second microphone.) Both signals - the microphone input signal and the line input signal - are mixed together equally in the transmitter. Connect the line output of the external audio source to the line input 1 of the bodypack transmitter. 1 Lock the plug by screwing down the coupling ring. Switch the line input on as described on page 52. Adjust the sensitivity of the line input as described on page 53. Mic input (dynamic): Mic input (Electret): Signal Signal LINE input: LINE input: LINE input: Signal Signal Signal Attaching the bodypack transmitter to clothing The bodypack transmitter is attached to clothing (e.g. belt, waistband) with the supplied belt clip 16. 16 The clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, withdraw the clip 16 from its fixing points and attach it the other way round. 28 | Tourguide 2020-D
![](/manual_guide/products/sennheiser-sk-2020d-instruction-manual-tourguide-2020d-5c5a059/29.png)