Sennheiser HDE 2020-D-II Instruction manual Tourguide 2020-D - Page 33
Setting up the charger, Placing the charger on a table or cabinet
View all Sennheiser HDE 2020-D-II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Putting the components into operation Setting up the charger CAUTION DANGER DUE TO HEAT ACCUMULATION! The charger and the receiver rechargeable batteries can get very hot during charging. If the heat cannot dissipate, the devices can be damaged. Make sure that the air vents of the charger are not covered or blocked. Provide sufficient ventilation so that the maximum ambient temperature of the charger does not exceed 40°C. Keep the charger away from heat sources and never expose it to direct sunlight. The charger can be: • placed on a table or cabinet • installed in a 19" rack • installed in a cabinet or similar. When using the "Conference Control" software, it automatically sorts all charger displays according to ascending serial numbers. The assignment of the charger displays of the software to the chargers becomes easier and clearer if you install the chargers according to ascending serial numbers. Placing the charger on a table or cabinet The charger has four plastic feet to ensure that it cannot slip on the surface on which it is placed. CAUTION RISK OF STAINING OF FURNITURE SURFACES! Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining. Do not place the charger on delicate surfaces. Place the charger on a table, cabinet or similar. 32 | Tourguide 2020-D