Sennheiser HDE 2020-D-II Instruction manual Tourguide 2020-D - Page 39
Automatically switching the HDE 2020-D-II on/off, Switching the EK 2020-D-II on/off, Tourguide 2020-D
![]() |
View all Sennheiser HDE 2020-D-II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Operation To switch the radio microphone off: Press and hold the ON/OFF button 11 until „OFF" appears on the display. The display 5 and the red LED 10 go off. 5 10 11 6 Automatically switching the HDE 2020-D-II on/off The receiver automatically switches on when you pull the earbows 1 apart. The display 3 switches on. 1 3 When you release the earbows, the receiver switches to standby mode (audio deactivated) and then switches off after 2 minutes. Switching the EK 2020-D-II on/off You can connect an induction loop or any pair of headphones with a 3.5 mm mono or stereo jack plug to the headphone socket 6 of the EK 2020-D-II. The headphone impedance must be 32 Ω or higher. 38 | Tourguide 2020-D
![](/manual_guide/products/sennheiser-sk-2020d-instruction-manual-tourguide-2020d-5c5a059/39.png)
38 | Tourguide 2020-D
Operation
To switch the radio microphone off:
Press and hold the
ON
/
OFF
button
11
until „
OFF
“ appears on the display�
The display
5
and the red LED
10
go off�
6
11
10
5
Automatically switching the HDE 2020-D-II on/off
The receiver automatically switches on when you pull the earbows
1
apart� The
display
3
switches on�
1
3
When you release the earbows, the receiver switches to standby mode (audio
deactivated) and then switches off after 2 minutes�
Switching the EK 2020-D-II on/off
You can connect an induction loop or any pair of headphones with a 3�5 mm
mono or stereo jack plug to the headphone socket
6
of the EK 2020-D-II� The
headphone impedance must be 32 Ω or higher�