Sharp 4470 FO-4470 Operation Manual - Page 127
Dialing and transmission problems
UPC - 074000034150
View all Sharp 4470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
9. Troubleshooting Problems and Solutions Dialing and transmission problems Problem Solution Dialing is not possible. • Make sure the power cord is properly plugged into a power outlet. • Make sure that the telephone line is properly connected to both the TEL. LINE jack and the wall jack. • Make sure that the fax machine is set to the correct dialing mode for your telephone line. See Option Setting 22 in Chapter 6. The power is on, but no transmission takes place. • Make sure that the receiving machine has paper. • Make sure that the telephone line cord is plugged into the TEL. LINE jack, and not the TEL. SET jack. • If the receiving machine is in manual mode with no attendant, reception will not be possible. • If the receiving machine is not a Sharp model, make sure it is G3 compatible. • Check the display for error messages. • Press the SPEAKER key and check for a dial tone. Nothing is printed at the receiving end. • Make sure that the document for transmission is placed face down in the feeder. A distorted image is • If ECM mode (Option Setting 9) is turned off, noise received at the other end. on the telephone line may cause distortion. Try sending the document again. • Make a copy of the document on your fax machine. If the copy is also distorted, your fax machine may need service. 125