Sharp 4470 FO-4470 Operation Manual - Page 140

QUICK REFERENCE GUIDE SENDING FAXES Place the document (up to 50 letter-size pages) face down in the document feeder. (Note: For Normal Dialing and Direct Keypad Dialing, you can also load the document after dialing the number.) RESOLUTION CONTRAST Press or if needed. Normal Dialing Press a Group Key. SPEED DIAL Press and enter a Speed Dial number (press START/ ENTER to complete entry if only one digit is entered). Enter a full number and press START/ ENTER . 3. When finished, press START/ ENTER . RESOLUTION CONTRAST 4. Press or if needed. SPEAKER 1. Lift extension phone or press . 5. Press START/ ENTER 2. Dial the fax number (if using an extension phone, dial on the extension phone keypad). 3. Wait for the reception tone (if a person answers, ask them to press their Start key). STORING AUTO DIAL NUMBERS 1. Press MENU , 3 , 0 , 1 . 4. Press START/ ENTER . Rapid Key Dialing Press the desired Rapid Key. Speed Dialing SPEED DIAL 1. Press and enter the desired Speed Dial number (press START/ ENTER if you entered a 1- digit number). 2. Press START/ ENTER . Direct Keypad Dialing 1. Dial the fax number. 2. Press 1 to store a number. (Press 2 to clear a number.) 3. To store a Rapid Key number, press the desired Rapid Key. SPEED DIAL To store a Speed Dial number, press and enter a number from 1 to 75 (press START/ ENTER if you entered a 1-digit number). (If clearing a number, select it as explained above and then perform Steps 7 and 9.) 4. Enter the full fax number. 5. Press START/ ENTER . 6. Enter a name by pressing the letter keys. 2. Press START/ ENTER . 7. Press START/ ENTER . BROADCASTING 1. Load the document and press BROADCAST . 2. Dial destination numbers: Press a Rapid Key. 8. Press 1 if this is a Chain Dial number. Press 2 if this is a regular number. STOP 9. Press repeatedly to exit. 138