Sharp AR-337 Service Manual - Page 24

AR-287/337 AR-407/507 [9] TROUBLE CODE LIST (AR-287/337/407/507) 1. Trouble code Trouble code CE 00 01 02 03 04 05 Content of trouble The other communication error has occurred. The print server card (AR-NC3D) is not installed or defective. The specified mail server or the FTP server is not found. The specified server does not correspond during image transmission. The entered account name of the FTP server or the password is invalid. The entered directory of the FTP server is invalid. Remark Trouble detection Network Network Network Network Network Network 2. Self diagnostics Trouble code MAIN SUB CE 00 01 Content Detail Cause Check and remedy Content Detail Cause Check and remedy 02 Content Detail Cause Check and remedy 03 Content Detail Cause Check and remedy 04 Content Detail Cause Check and remedy 05 Content Detail Cause Check and remedy Description The other communication error has occurred. Communication error Network Cable connection failure 1) Check that the Network Cable is properly inserted. The print server card (AR-NC3D) is not installed or defective. NC3D connection failure NC-3D is not installed to the AR-PB2A board. NC-3D control PWB trouble 1) Check that the NC-3D is installed to the AR-PB2A board. 2) Output the NIC Config. Page to check the NIC version. 3) Replace the NIC. The specified mail server or the FTP server is not found. The specified mail server or the FTP server is not found. Network Cable connection failure Network setup failure SMTP server/FTP server/NST trouble 1) Check that the Network Cable is inserted properly. 2) Check that the connected network supports TCP/IP protocol. 3) Check from the Web Page that the Primary/Secondary E-mail Server Address or the Destination FTP server/Desktop PC address are properly set. 4) If the above address is described with Hostname, check that the DNS server is properly set. 5) Check that the SMTP server/FTP server/NST causes a trouble or not. The specified server does not correspond during image transmission. The specified server does not correspond during image transmission. Network Cable connection failure SMTP server/FTP server/NST trouble 1) Check that the Network Cable is inserted properly. 2) Check that the SMTP server/FTP server/NST causes a trouble or not. The entered account name of the FTP server or the password is invalid. The entered account name of the FTP server or the password is invalid. Network Cable connection failure The account name of the FTP server recorded as the destination or the password for the account name is erroneous. 1) Check that the Network Cable is inserted properly. 2) Check that the account name of the FTP server recorded as the destination and the password for the account name are proper. The entered directory of the FTP server is invalid. The entered directory of the FTP server is invalid. Network Cable connection failure Check that the directory name exists in the FTP server recorded as the destination. 1) Check that the Network Cable is inserted properly. 2) Check that the directory name exists in the FTP server recorded as the destination. 3/13/2000 9 - 1A