Sharp AR-337 Service Manual - Page 9

*1: "Option" means a finisher, an ADU, a paper feed desk, a large- capacity tray, or a paper feed module. (Operations when there is a difference between the option compositions) 1. Tandem copy: The tandem copy key is displayed, but the conditions to execute the tandem function are not satisfied. Code: XX Code 00 Code 10 11 12 13 20 21 22 23 24 30 40 41 50 51 52 53 Tandem operation condition SCSI communication disable Tandem mirror condition Model code disagreement ICU-ROM version disagreement PCU-ROM version disagreement OPE-ROM version disagreement After-process unit connection disagreement Paper exit port connection disagreement ADU connection disagreement DESK connection disagreement LCC connection disagreement ADU trouble information disagreement Sim26-6: Destination setup disagreement Sim26-46: Image output direction setup disagreement Security mode setup disagreement Duplex copy inhibition setup disagreement Staple inhibition setup disagreement Manual tray select inhibition disagreement when offset tray is selected 2. Tandem print: All the prints are made by MAIN. 22. Confidential print Enter PIN. In the driver menu. PIN D D D D D Client PC After RIP, image data and PIN are stored. Image data PIN data [1] HDD [2] [3] [4] [5] [6] [7] [8] Network card Printer board Enter PIN on the operation panel. PIN D D D D D AR-287/337 AR-407/507 (Outline) To protect confidential documents, print is inhibited unless the user performs the specified operation from the main operation panel after giving a print command from PC. (1) Accumulated print jobs Number of jobs 1 2 4 8 16 Number of pages of one job (A4, letter) 320 pages 240 pages 120 pages 60 pages 28 pages (2) The following operations can be performed during operation of confidential print or during confidential printing. · Checking all the lists of the accumulated confidential prints. · Delete of confidential print data (Password entry is required.) · Cancel of confidential print during printing by means of the "C" key. Invalid during recovery from pre-heat. (3) The following operations cannot be performed during confidential printing. · Changing the environment setup by means of the environment setup key. · Command of continuous output in a different size or from a differ- ent tray · For confidential printing, paper selection is allowed only in AUTO selection. · For confidential printing, paper insertion, booklet, and OHP index paper insertion are inhibited. (4) Confidential print output operation is allowed or inhibited as follows Ready: Allowed Copy reading: Inhibited Copy outputting: Inhibited Scanner document scanning: Inhibited Scanner data transmission: Inhibited Printing: Inhibited (Confidential print allowed when interrupted in offline.) Staple printing: Inhibited Tandem copy reading: Inhibited Tandem copy outputting: Inhibited Tandem print outputting: Inhibited (5) Conditions of password Number of digits: Characters: 5 Only numeric figures 0 to 9 (6) Process in the case of HDD overflow · The job is canceled. · The status monitor makes the error display to PC. · Notice Page output is performed. (7) Troubles during printing When the machine is stopped by paper empty or a paper jam, remove the trouble, and the job will be automatically continued. (8) Combination with the security function · When the security function is ON, confidential print is inhibited. · When confidential data is received, it is automatically canceled. · The status monitor makes the error display to PC. · Notice Page output is performed. Printout 2 - 9 3/13/2000