Sharp AX1200S Owners Manual for AX-1200S - Page 16
Super Steam Convection & Steam In, Automatic And Manual Cooking - parts
![]() |
UPC - 074000617667
View all Sharp AX1200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
IMPORTANT INSTRUCTIONS SUPER STEAM CONVECTION & STEAM IN AUTOMATIC AND MANUAL COOKING Before cooking 1. Make sure the reservoir is filled with fresh cold tap water and is installed. (See page 13.) 2. Make sure the empty drip tray is installed. (See page 13.) 3. Place food in the oven unless preheating is needed. (Refer to each chart to check if preheating is required in automatic operations.) After Cooking 1. After the oven has cooled, remove and empty the reservoir, wipe oven cavity. Wait a few minutes, then empty the drip tray. 2. Perform the Drain Water function at least once a day after using SuperSteam Convection or Steam mode. 3. Check that water is not dripping down before removing the drip tray, as a small amount of water drains into the drip tray when the reservoir is removed. Oven Door Opening Figure 1 You can stop the door with the upper part of the oven open to exhaust steam, to cool or dry the oven cavity temporarily after cooking. (See Figure 1) WARNING: Do not open the oven with your face close to the oven. Steam from the oven may cause burns. NOTE: Avoid opening and closing the door during cooking as the oven cavity temperature drops suddenly, which may affect the result. 14
![](/manual_guide/products/sharp-ax1200s-owners-manual-ax1200s-d952b1a/16.png)