Sharp AX1200S Owners Manual for AX-1200S - Page 40

TROUBLESHOOTING CHART If EE is displayed or you think the oven is not working properly, check the chart below before consulting a Sharp Authorized Servicer. This will help to prevent unnecessary service calls. TROUBLESHOOTING CHART ERROR MESSAGE / INFORMATION MESSAGE MESSAGE ON DISPLAY ACTION ERROR EE MESSAGE Due to technical error, call service for your nearest Sharp Authorized Servicer. SENSOR ERROR Finish cooking by time. Press Clear. The sensor does not detect vapor properly in microwave sensor mode. Press Stop/Clear and finish cooking using manual time. INFORMATION Wait. MESSAGE Oven is too warm to use. The oven is too hot to use Microwave Defrost or Steam Proof. Remove food from oven and allow to cool until the message clears. Water is frozen. The oven may not operate properly. Operate the oven with Convection Broil without food and preheat for 5 minutes. See page 29. Now cooling. After cooking, the oven and the parts will be hot. Now cooling is shown in the display until the oven cavity has cooled. The cooling fan may continue to operate up to 13 minutes. Now cooling will disappear when the oven has cooled. If you wish to use the warm oven, simply press Stop/Clear. Replace drip tray. Remove and replace the drip tray correctly. See page 13. In case the drip tray is not installed correctly, Replace drip tray will be shown in the display. Empty drip tray and replace. Empty drip tray and replace will be shown in the display when water remains in the drip tray. You must empty the drip tray and replace it before SuperSteam Convection or Steam Cooking will start. See page 13. Descaling is necessary. Follow step-by-step instructions for descaling. See page 15. Fill water reservoir. Remove reservoir and fill with water to the 2 mark. Replace and push firmly into place. Hot The oven cabinet and oven cavity are very hot. Pay extra attention not to burn yourself. 38