Sharp AX1200S Owners Manual for AX-1200S - Page 5
Unpacking And Installation Instructions - trim kit
UPC - 074000617667
View all Sharp AX1200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
UNPACKING AND INSTALLATION INSTRUCTIONS Unpacking and Examining Your Oven Remove: 1. all packing materials from inside the oven cavity. Read enclosures and SAVE the Operation Manual. 2. the feature sticker from the outside of the door, if there is one. Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, Door Seals and broken or loose door hinges and latches and dents Sealing Surfaces inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or SHARP AUTHORIZED SERVICER. Choosing a Location for Your Oven You will use your oven frequently so plan its location for ease of use. Do not place the oven on a mat, carpet or tablecloth or block the ventilation openings. The oven must be placed on a countertop which is a minimum of MIN. 36 inches (91.5 cm) from the floor. Allow at least 2 inches (5.1 cm) on the sides, and 2 inches (5.1 cm) 2" (5.1 cm) above the top of the oven (excluding the air vent opening) for air circulation. Be sure to position oven so that the rear cannot be touched inadvertently. MIN. 36" Your SuperSteam oven can be built into a cabinet or (91.5 cm) wall by itself, or above any electric wall oven, above warming drawer, above Sharp's Microwave Drawer, models KB-6002, KB-6015 or KB-6025 or above other Sharp Microwave Drawer models that specify the combination of this oven using Sharp's Built-in Kit, RK- 12S30. It cannot be built in above any gas wall oven. Oven Cavity Hinges Latches SuperSteam Oven CUTOUT ELECTRIC WALL OVEN / WARMING DRAWER / MICROWAVE DRAWER CUTOUT Illustration 1 Refer to Illustration 1 for proper location when building in above an electric wall oven, a warming drawer or SHARP Microwave Drawer. Carefully follow both the electric wall oven/warming drawer/microwave drawer installation instructions and Sharp's Built-in Kit instructions. Be sure that the clearance of the floor between the SuperSteam Oven and the electric wall oven/warming drawer/microwave drawer is a minimum of 2 inches (5.1 cm). Ordering a Built-in Kit If your dealer does not stock the kit, it can be ordered directly from the Sharp Accessories and Supplies Center. Have your credit card number available and call toll-free: 1-800-237-4277 for ordering the kit, RK-12S30 to be sent to your address. The kit includes ducts and finish trim strips and easy-to-follow instructions for installation as well as the location of the power supply. 3