Sharp AX1200S Owners Manual for AX-1200S - Page 41

TROUBLESHOOTING CHART The following situations are normal and are not signs that the oven is malfunctioning. QUESTION / SITUATION Control panel / power supply The display is black / blank. ANSWER * Check that power plug is connected to a suitable wall outlet. See page 4. * Check that fuse or circuit breaker is functioning properly. If not, correct. * Disconnect the oven from the power source, wait one minute and then plug into the wall outlet. If the problem exists, consult a Sharp Authorized Servicer. The display is fine but START * Open the door and close. Is the oven light off? Press will not function when pressed. START again. * If the display says, "Wait. Oven is too warm to use.", be sure to wait until it disappears and then press START. Electrical power supply is The cooking program will be cancelled. Continue to cook interrupted during cooking. with manual operation. Check food carefully as it cooks. Oven light is off during PROOF. Normal operation to prevent bread dough from drying on the surface. Oven light is off during This is normal operation. See page 15. descaling. Oven light is off when door is Oven light will turn OFF if the door is open for more than 5 opened. minutes. The display backlight is off. Sleep Mode may be ON. Press any pad, turn the Dial or open/close the door to activate display backlight. See page 35 to cancel Sleep Mode. 39