Sharp HT-DD5000 HTDD5000 Operation Manual - Page 14

DOLBY DIGITAL DVD DVD When you connect this unit to a DVD player which is playing a disc with the trademark, you can enjoy realistic, powerful sound by playing back the recorded signal through 6 speakers with the sound coming from the front left, front right, center, surround left, surround right and sub woofer speakers. To listen to a disc using the Dolby Digital mode: 1 Connect a DVD player. (See page 8.) 2 Press the DVD button. q The current DVD input channel will be displayed. If the DVD button is pressed while the current DVD channel is displayed, the input channel (ANALOG, COAXIAL, OPTICAL) can be changed. 3 Start the DVD player. Note: q When the Dolby Digital surround mode is being used, the equalizer will be set to FLAT. Type of Dolby digital signal There are different types of Dolby digital signals. When you select COAXIAL or OPTICAL for the DVD input channel, the following items will be displayed for 2 seconds. They will also be displayed when the DVD player is operating and the DVD button is pressed. Display DIGITAL Channels available Normal PCM playback Center only (monaural) Display DIGITAL DIGITAL Channels available Front (L, R) + surround (L, R) Front (L, R) + center Front (L, R) Front (L, R) + center + (When the surround mode surround (monaural) DIGITAL is set to Normal, Phantom DIGITAL or Wide sound will also be heard from the surround speakers.) Front (L, R) + surround Front (L, R) + center + DIGITAL DIGITAL (monaural) surround (L, R) q If a low frequency sound effect (Low Frequency Effect) contains a Dolby digital signal, "LFE" will light in the display. When this "LFE" is lit, low frequency signals will be output from the sub woofer. Œ Ž   ‘’“ When Dolby digital signals are input, the display will light up or go out, as shown to the left. The channel speaker and SW indicators are used to set the sound for listening in the surround mode and will light up according to the speaker signals that are present. Œ Lights up if the input contains a left channel signal.  Lights up if the input contains a center channel signal. Ž Lights up if the input contains a right channel signal.  Lights up if the input contains an "LFE" signal.  Lights up when the amplifier setting will output sound to sub woofer. ‘ Lights up if the input contains a left surround signal. ’ Lights up if the input contains surround signals. “ Lights up if the input contains a right surround signal. 13 HT-DD5000(SEC) TINSE0009SJZZ