Sharp HT-DD5000 HTDD5000 Operation Manual - Page 18

(Continued) X W SET UP MENU ITEM 1 2 DIGITAL DIGITAL 3 DIGITAL mS 01 45 2 DIGITAL 3 DIGITAL mS 0 1 14 15 s Speaker delay setting The best sound will be achieved by placing the front speakers, center speaker and surround speakers at the same distance from the listener. When some of the speakers are at a different distance from the listener, you can select a speaker delay to make it seem as though the speaker distances are the same. (Factory-shipped settings: CENTER → 0 ms, SURROUND → 5 ms) If the settings need to be changed due to the type of sound source being played or the conditions in the room, change them as follows. 1 Press the MENU button repeatedly to make "SP DELAY" appear. 2 Within 10 seconds, press the ITEM button to select "CENT-SP" or "SURR-SP". CENT-SP: To delay the sound from the center speaker SURR-SP: To delay the sound from the surround speakers q The selected speaker indicator(s) will flash. 3 W X Within 10 seconds, press the SET UP ( or ) button to select a value. Adjustable range CENTER: 0 ms - 5 ms SURROUND: 0 ms - 15 ms (When the DIGITAL indicator is lit) 15 ms - 30 ms (When the DIGITAL indicator is not lit) (Can be changed in 1 ms steps.) Notes: q As a guide for setting the correct delay time, 1 ms is equal to approximately 12" (30 cm) from where the selected speakers are placed further away from the listener than the typical location. q If the delay time for the surround speakers is set to a large value, a large sound space will be created. If it is set to a small value, the sound space will be small and intimate. 17 HT-DD5000(SEC) TINSE0009SJZZ