Sharp HT-DD5000 HTDD5000 Operation Manual - Page 25
Continued, HEADPHONES
View all Sharp HT-DD5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
(Continued) 1 2 3 HEADPHONES s Sleep operation The tuner and any components that are connected to the DVD, VCR-1, VCR-2, CD/AUX, MD/TAPE or PHONO jacks can be turned off automatically. 1 Play back the desired sound source. 2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. 3 Turn the jog dial to set the sleep time. 2 3 4 q The maximum sleep time you can specify is 2 hours, in 5-minute intervals. OFF ↔ 5 ↔ 10 1:55 ↔ 2:00 4 Press the ENTER button. 5 The unit will turn off automatically after the preset sleep time has elapsed. q When it is one minute before the sleep-off time, the vol- ume will start to fade. To check the remaining sleep time: Press the TIMER/SLEEP button twice. To cancel the sleep operation: Press the POWER button to turn the power off. Notes: q After the sleep operation has finished, the sleep setting time will be canceled. If you want to set the sleep operation again, start from the beginning of this procedure. q The sleep operation cannot control any components that are connected to the DVD, VCR-1, VCR-2, CD/AUX, MD/TAPE or PHONO jacks. q Before plugging in or unplugging the headphones, make sure the volume level is reduced. q Be sure your headphones have a 1/4" (6.3 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. 1 Set the SPEAKERS A and B button to OFF. 2 When headphones are connected, adjust the VOLUME control for the desired volume. Note: q When using headphones, it is recommended that you se- lect STEREO in the Dolby Surround mode. 24 HT-DD5000(SEC) TINSE0009SJZZ