Sharp HT-DD5000 HTDD5000 Operation Manual - Page 4
Preparation For Use
View all Sharp HT-DD5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PREPARATION FOR USE Unplug the AC power cord from the AC outlet before connecting or disconnecting any component. s Speaker connection Wires to be used with each speaker For the front, center and For the surround speakers sub woofer speakers Black Black 1 2 3 Black (with white line) Length: Approx. 98-7/16" (2.5 m) Black (with white line) Length: Approx. 393-3/4" (10 m) Connecting the speaker wires 1 Hold the speaker wire release catch down. 2 Insert the wire into the speaker terminal. 3 Release the catch. Caution: When connecting the speakers to the unit, connect the wires to the speakers first, and then to the terminals on the unit. Front speaker (Right) Black Front speaker (Left) Black Black (with white line) Front speakers Connect each front speaker wire to the FRONT SPEAKER A terminals as shown. Use speakers with an impedance of 8 ohms or more, as lower impedance speakers can damage the unit. q Connect the black wire with the white line to the negative (-) terminal, and the black wire to the positive (+) terminal. Note: q You can connect the speakers you have to the FRONT SPEAKER B terminals. The recommended impedance is 8 ohms. Black (with white lline) Black Black Center speaker Connect the center speaker wire to the CENTER SPEAKER terminals as shown. Use a speaker with an impedance of 8 ohms or more, as a lower impedance speaker can damage the unit. q Connect the black wire with the white line to the negative (-) terminal, and the black wire to the positive (+) terminal. Black (with white lline) Black (with white lline) Black 3 HT-DD5000(SEC) TINSE0009SJZZ