Sharp HT-DD5000 HTDD5000 Operation Manual - Page 8
Supplied FM antenna, Supplied AM loop antenna, Outdoor FM antenna, Outdoor AM antenna
View all Sharp HT-DD5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
(Continued) 1 2 3 AM loop antenna FM antenna 1 2 3 Outdoor FM antenna 49 feet (15 m) Outdoor AM antenna 25 feet (7.5 m) Ground rod 75 ohm coaxial cable Ground wire s Antenna connection Supplied FM antenna Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna Connect the AM loop antenna wire to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or wall with screws (not supplied). Notes: q If you still hear static even after adjusting the position of the AM loop antenna, try reversing the wires or turn off the power to any external unit not in use. q Do not place the antenna wires on the unit. It may result in noise generation, since the unit is equipped with digital electronics. Place the AM loop antenna and the FM antenna wire away from the unit for better reception. q If the antenna wires are placed near the AC power cord, they may cause interference. Outdoor FM antenna Use an outdoor FM antenna (75 ohm coaxial cable) if you require better reception. Consult your dealer. Note: When an outdoor FM antenna is used, disconnect the supplied FM antenna wire from the FM 75 OHMS terminal. Outdoor AM antenna Use an outdoor AM antenna if you need better reception. Consult your dealer. Note: When using an outdoor AM antenna, be sure to keep the wire of the AM loop antenna connected. AC OUTLET AC 120 V, 60 Hz To an AC outlet s Connecting the AC power cord After connecting the speakers and antennas, plug the AC power cord into a convenient AC outlet. Note: q Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time. Unswitched AC Outlet Used to plug in the AC power plug from other equipment. The power consumption of any units connected to this outlet should not exceed a total of 120 W. The power to any equipment connected to this outlet is not switched by the POWER switch on the HT-DD5000. 7 HT-DD5000(SEC) TINSE0009SJZZ