Sharp LC20B6US LC-20B6U-S Operation Manual - Page 41
Connecting a PC
UPC - 074000362291
View all Sharp LC20B6US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Connecting a PC Viewing an Image from a PC Use the PC-IN terminals to connect a PC. A • The PC input terminals are DDC1/2B-compatible. • Refer to page 42 for a list of PC signals compatible with the System. • Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD-TV before connecting with the PC. (See pages 41 and 42.) • Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your PC's manuals regarding converting to external output. To ANALOG To ANALOG RGB RGB terminal output terminal RGB cable (supplied) ø 3.5 mm stereo minijack cable (commercially available) To AUDIO input terminal PC To Audio output terminal Connecting the thumbscrew cables • Connect the thumbscrew cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug. • Do not remove ferrite cores attached to the RGB cable. Ferrite core Signal names for 15-pin mini D-sub connecter 543 21 10 9 8 7 6 15 14 13 12 11 Pin No. 1 2 3 4 5 Signal name R G B Not connected CSYNC Pin No. 6 7 8 9 0 Signal name GND (Ground) GND (Ground) GND (Ground) +5V GND (Ground) Pin No. q w e r t Signal name Not connected SDA HD VD SCL A • Pin No. 5 on the LCD TV set is not used for inputting the signal. • Pin No. 9 is not connected with the supplied RGB cable. Displaying an Image from a PC To view an image from a PC, perform the following procedures. 1 Select the PC mode using INPUT on the remote control or the LCD TV set. (See page 17.) 2 Select the PC input signal. (See page 41.) 3 Select the PC sound input mode. (See page 26.) 4 Adjust the "FINE SYNC." items if the PC image does not come in clearly. (See page 41.) 40