Sharp MX-C311 Quick Start Guide - Page 12
Part Names And Functions
View all Sharp MX-C311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PART NAMES AND FUNCTIONS (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) Automatic document feeder This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be scanned at once. (2) Document feeder tray Place the originals in this tray when using the automatic document feeder. (3) Operation panel (4) Document glass This is used to scan books and other originals that cannot be scanned using the automatic document feeder. (5) Finisher* This can be used to staple output. (6) Main power switch This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "on" position. (7) Output tray (center tray) Copy jobs and print jobs are delivered to this tray. (When a finisher is installed, the output tray (center tray) cannot be used.) (8) Tray 1 Up to 500 sheets of paper (21 lbs. (80 g/m2)) can be loaded in each tray. (9) Tray 2/Tray 3/Tray 4 (500 sheet paper feed unit is installed)* This holds paper. Up to 500 sheets (21 lbs. (80 g/m2)) of paper can be loaded. (10) USB connector (type A) Supports USB 2.0 (Hi-Speed). This is used to connect a USB memory or other USB device to the machine. * Peripheral device. For more information, see "PERIPHERAL DEVICES" in "Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide. 10