Sharp PN-G655RUP PN-655RU Operation Manual - Page 15
Other terminals, Connecting External Speakers
UPC - 074000046719
View all Sharp PN-G655RUP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Connecting Peripheral Equipment Other terminals Audio output terminals • Audio sounds which are input through the audio input terminal or PC audio input terminal are output. Connect to the audio input terminals of the connected equipment using an audio (RCA) cable (commercially available) or a PC audio cable (commercially available). • The audio output varies depending on the input mode selection (see page 20). • The volume level can be adjusted using the volume adjustment (see page 20). PC digital RGB (DVI-D) output terminal The video from the PC digital RGB (DVI-D) input terminal can be output to external equipment. Use this terminal to connect multiple units in a daisy chain using digital signal (DVI) cables (commercially available). Refer to page 15 for a connection example. RS-232C input/output terminals You can control the monitor from a PC by connecting an RS-232C straight cable (commercially available) between this terminal and the PC. (See pages 33 and 34.) Connecting External Speakers Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 10 W. 1.While pushing the tab, insert the tip of the cable. 2.Release the tab. 1. 2. Caution • Be sure to connect the + and - terminals and the left and right speakers properly. • Avoid short circuiting the + and - terminals. 13 E