Sharp PN-G655RUP PN-655RU Operation Manual - Page 38
Advanced operation
UPC - 074000046719
View all Sharp PN-G655RUP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Controlling the Monitor with a PC Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the "Basic operation" section. You can assign a unique ID number to each monitor (see page 27). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control) or from the PC using RS-232C cable. [Example] PC ID number: 1 ID number: 2 ID number: 3 ID number: 4 If monitors are connected as shown above, you can execute commands like "Set the volume of the monitor with ID 4 to 20". When controlling monitors linked in a daisy chain by designating ID numbers, you should basically avoid any duplication of ID numbers. ID numbers do not have to be assigned in ascending order starting from the PC. They can also be connected as shown below. [Example] PC ID number: 3 ID number: 2 ID number: 4 ID number: 1 E 36