Sharp PN-L702B PN-L702B Pen Software v2.2 Operation Manual - Page 11

Drawing with a Pen 1. Touch any of the "Pen 1" to "Pen 3" buttons. 2. Draw on the board with the touch pen. The drawn shape will be determined as an object 0.5 second* after you lift the touch pen from the board. If you start drawing another object within 0.5 second* after you lift the touch pen from the board, the drawn shapes will be determined to be a single object even though they are separate. * This period can be changed. (Page 21) Less than 0.5 second After 0.5 second Draw a shape. Draw another shape. Both shapes are determined as a single object. TIPS • You can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button 2 of the touch pen. To change functions using Function Button 2, select the touch panel driver "Properties", and set "Function Button 2" to "Pen Software Link" on the "Operation Setting" tab. • For details about objects, refer to page 13. • In certain cases, such as when a button on the toolbar is touched, the drawn shape will be fixed as an object before the specified time elapses after the touch pen is lifted from the board. • When "Pen Drawing" is set to "Both touch pen and finger", you can draw with your finger. n Changing the color and thickness of the pen The "Pen 1" to "Pen 3" palettes can be used to change the pen function settings. To display the palette, touch the button of the selected pen once again. (1) (2) (3) (1) Check this box to make the line transparent. The pen icon changes when this setting is enabled. Normal Transparent (2) Set the color and thickness of the line. The palette is closed. To use a pen of a different color and thickness, click (3) and select. TIPS • The method of closing the palette can be changed. (Page 21) E 11