Sharp PN-L702B PN-L702B Pen Software v2.2 Operation Manual - Page 16

Enlarging the view of the screen The steps for enlarging the view of the screen vary depending on the mode. n Enlarging the screen in whiteboard mode Double-click to enlarge the screen 1. Touch the "Pan" button. 2. Quickly touch the part of the board that you want to enlarge twice (double-click). Each time you double-click, the view changes in the order 100% > 150% > 200%, centered on the click position. Double-clicking at 200% returns the view to 100%. 150% 200% 100% Changing the display position when the view is enlarged To change the display position, drag on the screen with "Pan" selected. Enlarging the view of the screen with the pan window A thumbnail of the current sheet appears in the pan window on the toolbar. (1) Magnification (1) Shows the current screen magnification. (2) [-] [+] (2) Touch to enlarge or reduce the view between 100% and 400% in increments of 50%. (3) (3) Pan window (4) Shows a thumbnail of the current sheet. Each time you double-click inside the display frame, the zoom changes in the order 100% > 150% > 200%, centered on the clicked point. (4) Display frame Shows the area that is displayed on the screen. To move the area that is displayed, drag the display frame. TIPS • In Windows 7, if the touch mode setting of the touch panel driver is "Dual" and the input mode setting is "Standard" or "HandWrite", the screen can be enlarged or reduced by "Zoom" dual touch. When the screen is enlarged, the display position can be changed by dual touch. Drag with two fingers • For information on "Zoom", see the monitor operation manual. • Dual touch can be disabled (page 22). E 16