Sharp UX B20 UX-B20 Operation Manual - Page 19
Caution! Do
UPC - 074000033917
View all Sharp UX B20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1. Installation Installing the Print Cartridge 5 Make sure the cartridge holder has moved slightly away from the right side of the compartment, and then pull the green lever and open the cartridge holder cover. • If you are replacing the cartridge, remove the old cartridge. If you are going to use the old cartridge again, place it in an air-tight container. • CAUTION! DO NOT touch the contact area inside the cartridge holder, or pull on the cable that is connected to the cartridge holder. Note: If the print compartment cover is left open for approximately 30 minutes with a cartridge installed, the cartridge will automatically return to its home position. To make the cartridge return to the cartridge replacement position INK when this has happened, press . 6 Insert the new print cartridge into the cartridge holder. Cable Gold contact area 7 Place your index finger on the tab as shown and close the cartridge holder cover with your thumb. Make sure the cover clicks into place. 17