Sharp UX B20 UX-B20 Operation Manual - Page 63

5. Special Functions Caller ID (Requires Subscription to Service) If you subscribe to a caller identification service from your telephone company, you can have the fax machine display the name and number of the caller when you receive a call. Important: To use this function, you must subscribe to a caller identification service from your telephone company. Note that your fax may not be compatible with some caller identification services. ♦ Area Code mode: This step is needed if your telephone exchange cannot dial a local phone number (within your calling area code) when the area code is dialed with the phone number (see Step 5). 1 Press once and 3 times. Display: OPTION SETTING 2 Press once and 5 times. CALLER-ID 5. Special Functions 3 Press once. 1=YES, 2=NO 4 Press (YES) to turn on Caller ID. (To turn off Caller ID, press to Step 8.) and go AREA CODE # MODE 1=SET, 2=CLEAR 5 Press to select SET. (To clear a previously set area code, press and go to Step 8.) ENTER AREA CODE Note: Entering your area code in this step causes it to be automatically removed from local numbers in the Caller ID list (page 63). This is only required if you need to eliminate dialing of the area code when dialing a local number from the list. Example (using the area code "123"): If Step 6 is skipped, the Caller ID display will show 123-444-1234, and the number that will dial from the Caller ID list is 123444-1234. If the area code 123 is entered in Step 6, the Caller ID display will show 444-1234, and the number that will dial from the Caller ID list is 444-1234. 61