Sharp UX B20 UX-B20 Operation Manual - Page 48
Redial, Automatic redialing
UPC - 074000033917
View all Sharp UX B20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Sending a Fax by Automatic Dialing Redial You can automatically redial the last number dialed on the fax machine. This procedure can be used to send a fax or make a phone call. 1 If you are sending a fax, load the document(s). RESOLUTION/ • If desired, press RECEPTION to set the resolution and/or contrast. READY TO SEND 2 Press once. appears in the display, followed by the last number dialed. Make sure the number that appears is the number you wish to dial. 3 START/ If you are sending a fax, press MEMORY . Dialing begins. If you are making a phone call, lift the handset. Dialing begins. Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears in the display, remove the document as explained on page 89. (This may occur if the other fax machine doesn't respond properly when you attempt to send the document.) Automatic redialing If you use automatic dialing (including Direct Keypad Dialing) to send a fax and the line is busy, the fax machine will automatically redial the number. The fax machine will make three redial attempts at intervals of five minutes. During this time, RECALLING will appear in the display, followed by a two-digit number assigned to the fax job. You will not be able to dial any other locations while the message appears. ♦ You can press to clear the message and stop automatic redialing. ♦ Under certain conditions (for example if a person answers the call on a telephone), automatic redialing may stop before three redialing attempts are made. 46