Sharp VL-NZ150U VLNZ100U|VLNZ150U Operation Manual - Page 28
Inserting and Removing, a Card
View all Sharp VL-NZ150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Preparation Preparation Inserting and Removing a Card You can use an SD Memory Card or a MultiMediaCard for storing still images. Removing Perform steps 1 and 2 above, push the card (1) and pull the card straight out (2) as shown below. Inserting 1 Make sure that the Power switch is set to OFF. 2 Slide the card slot cover release and open the card slot cover in the direction of the arrow. Card slot cover release Notes: • You can use only the SD Memory Card or the MultiMediaCard (see page 71). • The supplied card is preformatted for immediate use. • See pages 73 and 74 for more information on the cards intended for use with this camcorder. Caution: • Do not remove the card from the camcorder while recording data on the card (S indicator flashes during recording). This may delete the recorded image or damage the card. 3 Insert a card into the slot as shown below, and push it in as far as it will go. Write-protect switch Label About the write-protect switch SD Memory Card has a write-protect switch. When the switch is set to the locked position, you cannot record/delete data or format the card. Set it to the unlocked position to record/ delete data or format the card. Back view Unlocked position Clipped corner 4 Close the card slot cover. Locked position 13