Sharp VL-NZ150U VLNZ100U|VLNZ150U Operation Manual - Page 48
Still Recording on Tape, Attaching the Supplied, Tripod Adapter
View all Sharp VL-NZ150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Useful Features Camera Recording Still Recording on Tape Available mode: TAPE-CAMERA You can record continuous still images of subjects. 1 Set the camcorder to TAPE-CAMERA mode. 2 In Recording Standby mode, press the STILL button fully. • A still image of the subject is displayed. 3 Press the REC START/ STOP button. • The still image of the subject will be recorded. To pause recording Press the REC START/STOP button. To cancel the still image Press the STILL button fully. Notes: • Still Recording can also be used during recording by pressing the STILL button fully. • The picture quality in Still Recording function will be slightly lower than normal pictures. Attaching the Supplied Tripod Adapter Attach the supplied tripod adapter when using a tripod with the camcorder. 1 Align the tripod adapter with the tripod adapter socket on the bottom of the camcorder, then rotate as shown below. Tripod adapter socket Tripod socket 2 Attach tripod to tripod socket. Note: • You cannot use the supplied tripod adapter, if the alignment pin is not retractable. Useful Features 33