Sharp VL-NZ150U VLNZ100U|VLNZ150U Operation Manual - Page 7
Inserting a Cassette, Inserting a Card
View all Sharp VL-NZ150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Inserting a Cassette Inserting a Card 1 Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door. • After confirmation sound, the cassette holder extends and opens automatically. Cassette compartment door release You can use an SD Memory Card or a MultiMediaCard for storing still images. 1 Make sure that the Power switch is set to OFF. 2 Slide the card slot cover release and open the card slot cover in the direction of the arrow. Card slot cover release 2 Insert a commercially available cassette fully with the window facing outwards, and with the erasure protect tab facing upwards. Erasure protect tab 3 Insert a card into the slot as shown below, and push it in as far as it will go. REC SAVE Write-protect switch Label 3 Press the W mark gently until the cassette holder clicks into place. • After confirmation sound, the cassette holder retracts automatically. "W" mark Clipped corner 4 Close the card slot cover. 4 Wait for the cassette holder to fully retract. Close the compartment door by pressing the center until it clicks into place. Note: • You cannot use a SmartMedia™ card or Memory Stick™ media. In this operation manual, "card" refers to the SD Memory Card or the MultiMediaCard. vi