Sharp VL-NZ150U VLNZ100U|VLNZ150U Operation Manual - Page 38
Playback
View all Sharp VL-NZ150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Basic Operations BBasaicsOipceraOtiopnserations CPalamyebraacRkecording Tape Playback Available mode: TAPE-VCR The LCD monitor screen functions as a handy playback monitor. Nothing needs to be connected, allowing instant on-screen playback with the sound through the built-in speaker. Media Selection switch Power switch To stop playback Press l. To turn the power off Set the Power switch to OFF without pressing the Lock button. Note: • The tape is automatically rewound when playback reaches the end of the tape. Operation button 1 Set the Media Selection switch to TAPE. 2 Hold down the Lock button and set the Power switch to VCR. Volume Control Available mode: TAPE-VCR When the camcorder is in TAPE-VCR mode, push the Volume control to the L or + side to increase (1) or decrease (2) the volume. The volume level indicator will appear on the LCD screen during adjustment only. Once the Volume control is released, the volume level indicator will disappear shortly afterwards. Lock button 3 Press j (or k) on the Operation button to rewind (or fast forward) the tape to the desired point. Volume control 4 Press m to begin playback. Note: • If you press the REC START/STOP button in TAPE-VCR mode, the " " mark appears and the camcorder enters Recording Standby mode. If you do not intend to record, press l to turn the " " mark off, then press m to begin playback. This will ensure your previous recording is not erased (see pages 49, 51). 23 Decrease V O L UME Increase Speaker