Sonos Controller for PC User Guide - Page 15
tatus indicator, To a home theater or amplifier, CONNECT:AMP instead. - install
View all Sonos Controller for PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2-4 • Repeat to install the other speaker wires. User Guide • If your speakers have banana connectors, you can insert the plugs directly into the banana jacks on the back of the CONNECT:AMP instead. 2. Attach the power cord and plug into a wall outlet-make sure the Voltage Switch on the back of the CONNECT:AMP is set to the proper position for your country before applying power. The Mute button indicator and the Status indicator will begin to flash. (If this Sonos component was previously connected to another Sonos system, the Status indicator may light solid white instead. Connect a SONOS CONNECT... To a home theater or amplifier 1. Choose one of the following options: • If you have digital inputs on your home theater or amplifier, you can use either a TOSLINK® optical audio cable or a digital coaxial cable to connect the CONNECT's digital audio output to the digital input on the receiver. • If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to connect a CONNECT's analog audio output to the audio inputs on the receiver. 2. Select the proper input channel on the receiver. 3. After you finish setting up your Sonos system, go to "Line-out" on page 11 to adjust the volume settings.