Sonos Controller for PC User Guide - Page 39
ZonePlayer 100 Back
View all Sonos Controller for PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2-28 ZonePlayer 100 Back User Guide Ethernet switch connectors (4) Use Category 5 Ethernet cable to connect to a router, computer, or additional network device such as a network-attached storage (NAS) device. LED indicators: • Green (link connection) • Flashing Yellow (network activity) Right speaker terminals Use high-quality speaker wire to connect the right speaker to the ZonePlayer 100. Left speaker terminals Use high-quality speaker wire to connect the left speaker to the ZonePlayer 100. Voltage select AC 115/230 V Select the voltage setting that is appropriate for your country. AC power (mains) input Use the supplied power cord to connect to power outlet. Analog audio out (fixed/variable) Use a standard RCA audio cable to connect the Sonos component's analog audio outputs to the audio inputs on a separate audio component, such as an amplifier or your home theater receiver. Analog audio in Use a standard RCA audio cable to connect the audio outputs from a separate audio component such as a CD player, to the Sonos component's analog audio inputs. Subwoofer output Note: If you disconnect your subwoofer, make sure to also disconnect the subwoofer's cable from the ZonePlayer output. Connect a powered subwoofer to this output using a standard RCA cable. The system will detect when a cable is connected to the subwoofer output and adjust the crossover frequency automatically.